HTML5: Are we there yet?


If you are a UX/UI/RIA/Interaction developer today, then HTML5 is an important technology for you, whether you develop directly for the Web or not. It is also important to realise that even though the HTML5 spec is still being drawn up—it’s not scheduled for completion until July 2014—much good work has already been done. The fact of the matter is that many elements of HTML5 are available in many modern browsers today—having said that though, even for browsers that do not support your desired HTML5 element or feature natively, there will typically be an alternative for you to degrade to. And as if more convincing were required about the relevance and validity of HTML5 today: it even has a logo!

HTML5 is the Semantic Web and Application Development specification. By that I mean that I think that these are the two most important areas covered by the specification.

The words Semantic Web have been bandied around for years, with various differing opinions on what that actually means. However, the bottom line is that to you it should mean absolutely nothing… well, to you as a consumer of the content—which is absolutely the way it should be. You don’t care that the content has been written, and therefore rendered by your browser, semantically; in fact, your browser probably doesn’t care that much either! But if that is the case, then what’s the point, why should we care about semantic markup at all? The answer is software. To your software, and the software of others, the semantics mean everything.

Consider the following markup for a fictitious blogging site, with classic HTML markup on the left, and semantic HTML5 markup on the right:


Even if you know little or nothing about HTML markup, you should be able to hazard a guess as to what the markup in both of these snippets is attempting to describe. In fact, the differences between the two may not be that obvious to you. But consider this: note the class names in the snippet on the left; it is possible to give a tag, a DIV tag in this example, any class name you like, such as header or navigation. So if you’re writing a piece of software to find all the navigation links in a page, what should your code look for? Any DIV tag with a class name navigation? Well, that might work in this case, but what if your software needs to work outside of this scenario, on lots of different pages, out there in the big, bad, World Wide Web, where the markup author has called that class nav or links or site-links or … ad infinitum.

Simply, the markup on the left is ambiguous. The authors intent is not truly captured—merely implied—and software hates ambiguity, in fact, ambiguity breaks software. Now take a fresh look at the semantic version on the right. Is there any ambiguity in where the author intended the navigation links to reside, or even that there are actually navigation links on the page at all? Or the header, or the footer for that matter? No. And that’s what the Semantic Web will give to us, the clear intent of author expressed right there in the markup.

To a XAML-jockey like me this totally resonates and I’m pleased to see this coming to the Web; I think that this is a big deal.


Should I consider HTML5 for my next Web based project?


Should I bet the farm on HTML5?


Should I use HTML5 exclusively for my application development (pah! to Silverlight and Flash)?

Absolutely not! I know I’ve not discussed the application development side of the specification yet, so this question might seem a little out of context—see below—but this is a common question I’ve seen on the Web, and I want to cover here and now. Silverlight and Flash are still extremely powerful, appropriate and relevant technologies available in your toolbox today; you most definitely should be leaning on these as you plan and build your applications, now and probably a long way into the future. I think it extremely unlikely that HTML5 will ever make technologies like these redundant.

Where are we?

As I said above, I’ve not gone into any detail on the second aspect of the HTML5 specification that I think is really important: Application Development. On that front, I’m on a voyage of discovery myself to a large extent, especially with the newer features, so as I navigate this important aspect of the specification—and brush up on my JavaScript along the way—I plan post my thoughts and findings as I go.

The next post will be about the minimum markup required to be a valid HTML5 page, along with my typical HTML5 page template, followed probably by a post on the much talked about Canvas element. As usual, if you have any comments, questions, flames, enhancements I would love to hear from you. In the meantime, think deeply and enjoy.


Silverlight: Custom Design-Time Properties


Using themes in Silverlight—such as this really great one from these experts in awesomeness—at design-time, can be a real pain; especially then you’re working exclusively in Visual Studio. For example:


What does the UI for the Home.xaml look like? Reading the XAML there should be a couple TextBlock elements displaying some sample text. However, you cannot see this content properly because the background of the designer surface is white, but then so is the text in the view—Expression Blend does do a better job here, but it’s still not that great.

What typically happens in your development cycle is that you temporarily set the background colour to something visible in the designer, do your layout/design work, and then try to remember to remove hacked properties again before you deploy or test the view; toggle on, toggle off, rinse and repeat. This stops being funny very quickly.

I wanted to address this problem, but in a way that might already be familiar to both designers and developers. Expression Blend first introduced the notion of design-time properties by way of d:DesignWidth and d:DesignHeight, which have also made their way into Visual Studio. These properties enable you set the height and width of any element that only take effect from within the designer. This is a useful feature, however, today there is no way to extend these design-time properties, and today you only really have height and width to play with—along with support for design-time data. Which is nice and all that, but they are not versatile enough to help solve this problem.

Here’s what I’ve come up with:

public static class DesignTime
    private static readonly Brush DefaultBackgroundBrush =
        new SolidColorBrush(Colors.DarkGray);

    public static Brush GetBackground(DependencyObject obj)
        return (Brush)obj.GetValue(BackgroundProperty);

    public static void SetBackground(DependencyObject obj, Brush value)
        obj.SetValue(BackgroundProperty, value);

    public static readonly DependencyProperty BackgroundProperty = DependencyProperty.RegisterAttached(
        new PropertyMetadata(

    private static void OnBackgroundPropertyChanged(
        DependencyObject d, DependencyPropertyChangedEventArgs e)
        if (!DesignerProperties.IsInDesignTool)

        var p = d as Panel;
        if (p != null)
            p.Background = e.NewValue as Brush;

Here I have a single static class—called DesignTime—with an attached property—called Background. I have defined a property changed event handler that:

  1. Checks to see if we’re in the designer
  2. If we are, then try to cast to Panel—but this could be anything that has a Background property
  3. And then, set the background to the desired colour

This class only supports the Background property, but you would simply add a new dependency property for each design-time property you would like to support. If you apply the new property to the view I showed you earlier, you will get the following result:


As you can see from the screenshot above, I created a new XML namespace, so I can reference the DesignTime class, and therefore the Background property, with the prefix of pj. I then applied the property to the top level Grid element. Which renders on the designer nicely, assuming you like orange. However, when we launch the application, the original expert styling shines through, just as you would hope:


While I have not tested this approach in WPF I strongly suspect that it will Just Work™. Click here to download the sample code. As usual, if you have any comments, questions, flames, enhancements I would love to hear from you. In the meantime, think deeply and enjoy.